Save when you switch to Dyson hand dryers
Reduce carbon emissions and running costs, with up to 88% less CO₂.⁷ Costs up to 99% less to run than paper towels.³
Reduce carbon emissions and running costs, with up to 88% less CO₂.⁷ Costs up to 99% less to run than paper towels.³
Two 0.02 in curved apertures create 374mph⁶ sheets of air that follow the contours of your hands, removing more water, in less time.
The HEPA filter captures 99.97% of particles⁴ from the air.
Acoustically engineered to minimize restroom noise.
Switch between two power modes on one machine. Max mode for busy areas of high footfall or Eco mode for energy-efficiency and acoustic control.
Our powerful digital motor spins at 75,000 rpm to shift 5.3 gallons of air per second,⁶ for a 10-second¹ dry time in Max mode.
The Dyson Airblade 9kJ hand dryer produces up to 88% less CO₂ emissions⁷ than single-use paper towels and costs up to 99% less to run.³ Creating a better environment in your restrooms and the world outside.
All Dyson Airblade™ hand dryers are certified by the Carbon Trust.
All Dyson Airblade™ hand dryers undergo rigorous testing by Dyson. The impact of drying hands has been tested in universities and published in international journals.
Find out why our hand dryers are hygienic.
9.92 lbs
10 seconds² Max mode / 12 seconds² Eco mode
900w Max mode / 650w Eco mode
5,000 per second Max mode / 4,533 per second Eco mode
Up to 75,000 rpm
79db(A) Max mode / 76db(A) Eco mode
5.3 gal/s Max mode / 4.8 gal/s Eco mode (LV)
100-127v (LV) 200-240v (HV)
50-60hz
32-104°F
30 seconds
Captures 99.97% of particles⁴
Yes
19.69 in (500 mm)
17.72 in (450 mm)
4 in (100 mm)
The power mode can be set at installation of the product to either Max or Eco mode. Max mode operates at 900W and delivers a 10-second dry time,¹ perfect for high footfall environments. Eco mode, operating at 650W, delivers a 12-second dry time¹ but uses only 9.1kJ of energy per dry and is better suited for locations such as offices. The power mode can be altered following install but would need removal from the wall to do so as the switch is not accessible externally.
To ensure the machine performs to its best and remains hygienic, the Dyson Airblade 9kJ hand dryer should be cleaned daily. Please refer to the cleaning guide for further information.
Backplates are recommended for use on plasterboard and cavity walls. They can also be used when replacing other Dyson Airblade™ hand dryers.